Lippert 191025, Инструкция по установке и эксплуатации

Страница: 2 / 16

2
lippert.com 432-LIPPERT (432-547-7378) Rev:06.30.22
JT’s Strong Arm
™
Travel Trailer
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-002345
Introduction
The JT Strong Arm
™
Stabilizer System is a locking bracket
system used to stabilize and eliminate chassis movement
in travel trailers using a triangulation system attached to
the coach’s landing gear or jacks and frame. The JT Strong
Arm Stabilizer system is intended to eliminate chassis
movement in travel trailers. It should not be used for any
other purpose.
Additional information about this product can be obtained
from lci1.com/support or by downloading the free
LippertNOW. The app is available on Apple App Store
®
for
iPhone
®
and iPad
®
and also on Google Play
™
for Android
™
users.
iPhone
®
, and iPad
®
are registered trademarks of Apple Inc.
Google Play
™
and Android
™
are trademarks of Google Inc.
Safety
Read and fully understand all instructions within this
manual and adhere to all safety labels.
FAILURE TO ACT IN ACCORDANCE WITH THE
FOLLOWING MAY RESULT IN DEATH, SERIOUS
PERSONAL INJURY OR SEVERE PRODUCT OR
PROPERTY DAMAGE.
NEVER LIFT THE UNIT COMPLETELY OFF THE
GROUND. LIFTING THE UNIT SO THE WHEELS ARE
NOT TOUCHING THE GROUND WILL CREATE AN
UNSTABLE AND UNSAFE CONDITION.
THE TRAILER MUST BE SUPPORTED PER THE
MANUFACTURER’S RECOMMENDATIONS BEFORE
WORKING UNDERNEATH. FAILURE TO DO SO MAY
RESULT IN DEATH, SERIOUS PERSONAL INJURY OR
SEVERE PRODUCT OR PROPERTY DAMAGE.
ALWAYS WEAR EYE PROTECTION WHEN
PERFORMING SERVICE OR MAINTENANCE TO
THE TRAILER. OTHER SAFETY EQUIPMENT TO
CONSIDER WOULD BE HEARING PROTECTION,
GLOVES AND POSSIBLY A FULL FACE SHIELD,
DEPENDING ON THE NATURE OF THE SERVICE.
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
Electric Stabilizer Jack Aftermarket Adapter Kit Electric Stabilizer Jack Aftermarket Adapter Kit
Part # Part # Description Description
314597 Electric Stabilizer Jack Pad Adapter Kit
NOTE:
If using the JT’s Strong Arm™ Travel Trailer kit with
Electric Stabilizer Jacks, an additional kit will be required
for the foot pad. Use the Electric Stabilizer Jack Adapter
Kit to attach your JT’s Strong Arm Jack Stabilizers
(sold separately) to your electric stabilizer jack foot pads.
One plate goes on each side of the jack pad to allow
electric jack to fully retract.