Rev: 11.27.19
Page 8
CCD-0002710
Slide Room Installation
1.
Place room on top of the hat channel(s) (Fig. 6). Center the room in the slide opening.
NOTE:
Make sure the room is centered before securing room to hat channel(s).
2.
Locate the set of front slide-out mounting holes (Fig. 6), in the hat channels, closest to the front of the
slide-out and maintain room alignment. Secure the room to the hat channel(s) with OEM-supplied
#8 - 32 x 1" bolts, #8 SAE flat washers and #8 - 32 flange nuts.
3.
Locate the set of rear slide-out mounting holes (Fig. 6), in the hat channels, closest to the rear of
the slide-out and maintain room alignment. Make sure dual slide-out assemblies are parallel to one
another when securing the room to the hat channels. This will help ensure smooth operation of the
slide-out room. Secure the room to the hat channel(s) with OEM-supplied #8 - 32 x 1" bolts, #8 SAE flat
washers and #8 - 32 flange nuts.
4.
Locate the front and rear interior slide-out mounting holes (Fig. 6) in the hat channels. Secure the
room to the hat channel(s) with OEM-supplied #8 bolts, washers and flange nuts.
Fig. 6
Hat Channels
Drive-side
Idler-side
Rear Slide-out Mounting Holes
Rear Interior Slide-out Mounting Holes
Front Interior Slide-out Mounting Holes
Front Slide-out Mounting Holes