M-Fire Units
User’s Manual
Version 1.2 | 14/01/20
Page 3
M-Fire Stove
Burner 1 = bottom (cooker), Burner 2 = top (cooker hood)
The second button from the left serves as a switch to close off
the gas supply to the cooker.
A gas valve is placed at the bottom of the M-Fire Stove to close
off the gas supply to the cooker.
M-Fire Rack
Burner 1 = lower shelf, Burner 2 = upper shelf
The burner unit is connected to the operation console via cable and gas hose. Control buttons, main
voltage indicators, and, power supply etc. are located on the control console. The standard operation
console can be used in locations without a mains power supply as it is equipped with a battery.
Safety aspects
The control desk contains an emergency stop switch. If this switch is pressed, the electrical supply
(mains voltage and low-voltage supply) will be interrupted.
The burner unit of the “M-Fire” operates on a safe voltage of 12 Volts DC.
The control console is equipped with a ball valve with which the gas supply can be interrupted. After
completing the training, the tap on the gas bottle must be closed! If the burner unit is part of a training
system, a main gas valve is provided.
The burner unit is water-resistant. The operation console is splashproof.
