Pages of a book or magazine
used to adjust height
18
Most infra-red remote
control handsets
continually transmit
commands while a key is
pressed. However, some
keys will only transmit the
command once and then
stop, even if you are still
pressing the key. If you
cannot find a key that
continually transmits
commands, you will have
to repeatedly press and
release the key on your
other handset to
transmit a series of
commands.
To align the handsets vertically
●
Place the two handsets on a flat surface, approximately a finger-width apart.
●
Use the pages of a book or magazine to adjust the height of one handset until
the infra-red transmitter is aligned with infra-red receiver.
To align the handsets horizontally
●
Press the
LEARN
key to turn on the
LEARN
indicator.
Do not press any other keys on the Hi-Fi Personal Handset at this stage.
●
Press and hold any key on your other handset to transmit a command.
The
LEARN
indicator will flash rapidly when the Hi-Fi Personal Handset receives
the command, and will turn on again when no command is received.
●
Move the other handset from side-to-side while transmitting a command. The
red LED will flash as the Hi-Fi Personal Handset receives a command.
Note the extreme positions when the Hi-Fi Personal Handset stops receiving the
command, and the red LED stays permanently lit.
●
Position the handset halfway between these two extreme positions for the
best signal.
Содержание Sondek CD12
