Operating Modes
Key to symbols
SYMBOL MODE
MEANING
Standby
The unit is waiting for an audio signal
In this mode the unit consumes minimal
power. The unit will enter standby mode,
ten minutes after audio input ceases.
On
The unit is fully powered-up
The unit will enter this mode as
soon as it receives an audio
signal.
Thermal Standby
The unit has overheated
During very demanding, sustained use the
unit will go into Thermal Standby mode in
order to allow itself to cool down. When in
this mode the unit will not produce any
sound. The unit will return to On mode
when its temperature has dropped to its
operating level.
English
Parameters
The CLASSIK AFEKT speaker is equipped with four adjustable parameters (features)
that enable you to alter its performance to suit your taste.
NOTE:
The parameters can only be adjusted when the CLASSIK AFEKT speaker is not in
standby mode.
Adjusting the parameters
To select the parameter you wish to adjust:
●
Hold
FEATURE
.
●
Repeatedly press
UP
or
DOWN
until the letter for the desired parameter
appears.
●
Release
FEATURE
.
●
Repeatedly press
UP
or
DOWN
to change the setting.
NOTE:
A few seconds after the last key press
the display changes to
To restore the factory defaults:
●
Disconnect the CLASSIK AFEKT speaker from the mains supply and wait for
the display to go blank.
●
While holding
FEATURE
reconnect the mains supply.
●
Continue to hold
FEATURE
until the display shows
H
NOTE:
A few seconds after releasing
FEATURE
the display changes to
-
CLASSIK AFEKT
BASS REINFORCEMENT SPEAKER
OWNER’S MANUAL
-
