CE Declaration of Conformity
Linn Products Ltd declare that this product is in conformance with the Low Voltage
Directive 73/23/EEC and Electromagnetic Compatibility 89/336/EEC as amended by
92/31/EEC and 93/68/EEC.
The conformity of the designated product with the provisions of Directive number
73/23/EEC (LVD) is proved by full compliance with the following standards:
Standard
Date of
Test type
number issue
EN60065 1998
General
requirements
Marking
Hazardous radiation
Heating under normal conditions
Shock hazards under normal
operating conditions
Insulation requirements
Fault conditions
Mechanical strength
Parts connected to the mains supply
Components
Terminal devices
External flexible cords
Electrical connections and mechanical fixings
Protection against electric shock
Stability and mechanical hazards
Resistance to fire
The conformity of the designated product with the provisions of Directive
number 89/336/EEC (EMC) is proved by full compliance with the following
standards:
Standard number
Date of issue
Test type
EN55013 2001
Conducted
emissions
EN55013 2001
Absorbed
emissions
EN55020 2002
Immunity
FCC notice
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
Copyright and acknowledgements
Copyright © Linn Products Limited. First edition June 2002.
Linn Products Limited, Floors Road, Waterfoot, Glasgow, G76 0EP, Scotland,
United Kingdom.
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior written
consent of the publisher.
Printed in the United Kingdom.
CLASSIK, AFEKT, UNIK
and the Linn logo are trade marks of Linn Products Limited.
The information in this manual is furnished for informational use only, is
subject to change without notice, and should not be construed as a
commitment by Linn Products Limited. Linn Products Limited assumes no
responsibility or liability for any errors or inaccuracies that may appear in
this manual.
English
CLASSIK AFEKT
BASS REINFORCEMENT SPEAKER
OWNER’S MANUAL
