Linn CLASSIK AFEKT Скачать руководство пользователя страница 5

Introduction

The CLASSIK AFEKT is a bass reinforcement speaker designed for use in home
cinema systems. The CLASSIK AFEKT speaker has been designed to accurately
reproduce the bass portion of audio signals in order to enhance your enjoyment of
your home cinema experience. When used with Linn’s CLASSIK UNIK speakers, the
combination will replicate the full range of an audio signal, realistically and
dynamically. Amongst the CLASSIK AFEKT’s features are parameters which have
been factory set for optimum performance when the speaker is used with the Linn
CLASSIK MOVIE SYSTEM. However, the parameters are adjustable should you wish to
alter the operation of the speaker.

Like all of Linn’s speakers, the CLASSIK AFEKT speaker exemplifies our commitment
to use the latest technology in order to continually improve the quality of our
products. We are certain it will provide you with many years of superb performance.

Unpacking

The CLASSIK AFEKT bass reinforcement speaker is heavy: take care when removing
it from its packaging.

The CLASSIK AFEKT speaker comes in a box with the following accessories:

mains lead

phono lead

warranty card

this manual

We recommend that you retain the packaging in case you need to transport the
CLASSIK AFEKT speaker at a later date.

Positioning

The CLASSIK AFEKT speaker can be placed anywhere you find convenient but
please consider the following points:

The CLASSIK AFEKT speaker is best suited to be positioned on a floor, not a 

table, shelf etc. It is heavy and must be stably supported.

For best results, position your CLASSIK AFEKT speaker as close as possible to

either your left front or right front speaker.

Bass notes will be accentuated if the CLASSIK AFEKT speaker is positioned 

close to a wall or in a corner.

Experimenting with the position may be necessary in order to match the 

audio output of the CLASSIK AFEKT speaker with the acoustics of the room.

Cleaning

Disconnect the CLASSIK AFEKT speaker from the power supply before cleaning.
Remove dust and fingerprints with a soft, dry cloth. Avoid using domestic cleaning
products on the unit.

English

CLASSIK AFEKT

BASS REINFORCEMENT SPEAKER

OWNER’S MANUAL

Содержание CLASSIK AFEKT











Отзывы: