44
Chapter 7: Configuring the Router’s Web-Based Utility
Access Restrictions
Dual-Band Wireless Access Point
2. Click the
Edit List
button. This will open the List of PCs screen, shown in Figure 7-23. From this screen, you
can enter the IP address or MAC address of any PC to which this policy will apply. You can even enter ranges
of PCs by IP address. Click the
Apply
button to save your settings, the
Cancel
button to undo any changes,
and the
Close
button to return to the Filters tab.
3. If you wish to Deny or Allow Internet access for those PCs you listed on the List of PCs screen, click the
option.
4. You can filter access to various services accessed over the Internet, such as FTP or Telnet, by selecting a
service from the drop-down menus next to Blocked Services. If a service isn’t listed, you can click the
Add
Service
button to open the Service screen, shown in Figure 7-24, and add a service to the list. You will need
to enter a Service name, as well as the Protocol and Port Range used by the service.
5. By selecting the appropriate setting next to Days and Time, choose when Internet access will be filtered.
6. Lastly, click the
Save Settings
button to activate the policy.
To create an Inbound Traffic Policy
1. Enter a Policy Name in the field provided. Select
Inbound Traffic
as the Policy Type.
2. Enter the
IP Address
from which you want to block. Select the Protocol:
TCP
,
UDP
, or
Both
. Enter the
port
number or select
Any
. Enter the IP Address to which you want to block.
3. Select
Deny
or
Allow
as appropriate.
4. By selecting the appropriate setting next to Days and Time, choose when the Inbound Traffic will be filtered.
Lastly, click the
Save Settings
button to activate the policy.
When finished making your changes on this tab, click the
Save Settings
button to save these changes, or click
the
Cancel Changes
button to undo your changes.
Internet Access can also be filtered by URL Address, the address entered to access Internet sites, by entering the
address in one of the Website Blocking by URL Address fields. If you do not know the URL Address, filtering can
be done by Keyword by entering a keyword in one of the Website Blocking by Keyword fields.
Figure 7-24:
Figure 7-23:
Figure 7-25:
