![background image](http://html1.mh-extra.com/html/linksys/wrt54gr-wireless-g-broadband-router/wrt54gr-wireless-g-broadband-router_quick-installation-manual_1924865004.webp)
4
D
Select one of the following as the Internet Connection Type:
•
Automatic Configuration - DHCP:
Select this setting if your ISP
provides dynamic IP addresses using DHCP.
•
Static IP:
Select this setting if your ISP assigns you a static IP address,
then fill out the
Internet IP Address
,
Subnet Mask
,
Gateway
, and
DNS
fields with the information you received from your
ISP. You will need to enter at least one DNS address.
•
PPPoE:
Select this setting if your ISP you to use PPPoE to connect to the
internet. Then fill out the
User Name
and
Password
fields with the
information provided by your ISP. If you always want to be
connected to your ISP, select the
Keep Alive setting
, or select the
Connect on Demand
setting if you are charged for the time that you
are connected to your ISP.
•
PPTP
(Europe only): Select this setting if your ISP requires you to
use PPTP to connect to the internet. Then complete the
Internet IP
Address
,
Subnet Mask
,
Gateway
,
User Name
, and
Password
fields with
the information provided by your ISP. If you always want to be
connected to your ISP, select the
Keep Alive setting
, or select the
Connect on Demand
setting if you are charged for the time that you
are connected to your ISP.
•
Telstra
(Australia and New Zealand only): Select this setting only if you
are connecting to the internet using a HBS connection. Check with your
ISP for setup information.