![background image](http://html1.mh-extra.com/html/linksys/wrt54ag/wrt54ag_user-manual_1924806026.webp)
Dual-Band Wireless A/G Broadband Router
45
44
Maximum Number of DHCP Users
(Optional) Enter the maximum number
of PCs that you want the DHCP server to assign IP addresses to. This number
cannot be greater than 253. The default is
50
.
Client Lease Time
The Client Lease Time is the amount of time a network
user will be allowed connection to the Router with their current dynamic IP
address. Enter the amount of time, in minutes, that the user will be “leased” this
dynamic IP address. After the time is up, the user will be automatically
assigned a new dynamic IP address. The default is
0
minutes, which means one
day.
Static DNS 1-3
The Domain Name System (DNS) is how the Internet trans-
lates domain or website names into Internet addresses or URLs. Your ISP will
provide you with at least one DNS Server IP Address. If you wish to use anoth-
er, type that IP Address in one of these fields. You can type up to three DNS
Server IP Addresses here. The Router will use these for quicker access to func-
tioning DNS servers.
WINS
The Windows Internet Naming Service (WINS) manages each PC’s
interaction with the Internet. If you use a WINS server, enter that server’s IP
Address here. Otherwise, leave this blank.
Currently Assigned: DHCP Clients Table
Click the
DHCP Clients Table
button to view the list of PCs that are given IP addresses by the Router (see
Figure 6-17). For each PC, the list shows the Client Hostname, IP Address,
MAC Address, and and the amount of DHCP client lease time left. Click the
Refresh
button to display the most current information.
To save your changes on this page, click the
Apply
button. To cancel any
unsaved changes on this page, click the
Cancel
button. To get more information
about the features, click the
Help
button.
Figure 6-17
The
DHCP
screen, shown in Figure 6-16, allows you to configure the settings
for the Router’s Dynamic Host Configuration Protocol (DHCP) server func-
tion. The Router can be used as a DHCP server for your network. A DHCP
server automatically assigns an IP address to each computer on your network.
If you choose to enable the Router’s DHCP server option, you must configure
all of your network PCs to connect to a DHCP server (the Router), and make
sure there is no other DHCP server on your network.
DHCP Server
DHCP is enabled by factory default. If you already have a
DHCP server on your network, or you don’t want a DHCP server, then click the
Disable
radio button (no other DHCP features will be available).
Starting IP Address
Enter a value for the DHCP server to start with when
issuing IP addresses. Because the Router’s default IP address is
192.168.1.1
,
the Starting IP Address must be 192.168.1.2 or greater, but smaller than
192.168.1.253. The default Starting IP Address is
192.168.1.100
.
DHCP
Figure 6-16