Dual-Band Wireless A/G Broadband Router
The Incoming Access Log gives you a log of all the incoming Internet traffic,
displaying the Source IP address and Destination Port Number of the Router
for each activity (see Figure 6-14). Click the
Refresh
button to update the logs.
Click the
Close
button to return to the
System
screen.
The Outgoing Access Log gives you a log of all outgoing Internet traffic. For
each activity, it displays the LAN IP address, the Destination URL or IP
address of the Internet site accessed, as well as the Service/Port Number used
(see Figure 6-15). Click the
Refresh
button to update the logs. Click the
Close
button to return to the
System
screen.
To save your changes on this page, click the
Apply
button. To cancel any
unsaved changes on this page, click the
Cancel
button. To get more informa-
tion about the features, click the
Help
button.
43
To remotely manage the Router, enter
http://xxx.xxx.xxx.xxx:8080
(the x’s
represent the Router's Internet IP address, and 8080 represents the specified
port) in your web browser’s
Address
field. You will be asked for the Router’s
password. After successfully entering the password, you will be able to access
the Router’s web-based utility.
MTU
MTU is the Maximum Transmission Unit. It specifies the largest pack-
et size permitted for Internet transmission. Keep the default setting,
Auto
, to
have the Router select the best MTU for your Internet connection. To specify a
MTU size, select
Manual
, and enter the value desired (default is
1400
). You
should leave this value in the 1200 to 1500 range.
Log
The Router can keep logs of all traffic for your Internet connection. To
disable the Log function, keep the default setting,
Disable
. To monitor traffic
between the network and the Internet, select
Enable
.
Send Log To
Enter the IP Address of the PC where you would like the Logs
sent.
Temporary logs can be accessed by clicking either the
Incoming Access Log
or
Outgoing Access Log
button.
42
Note:
If the Remote Management feature is enabled, anyone who
knows the Router’s Internet IP address and password will be able to
alter the Router’s settings.
Figure 6-14
Figure 6-15