Chapter
Advanced Configuration
0
Wreless-G Busness Ethernet Brdge
Administration > Firmware Upgrade
Administration > Firmware Upgrade
This screen allows you to upgrade the Bridge’s firmware
after you have downloaded a new firmware file from the
Linksys website. Firmware should only be upgraded if you
experience problems with the Bridge.
Enter the name of the firmware file or click
Browse
to
locate the file on your computer, then click
Upgrade
to
begin the upgrade.
System Status
The System Status tab displays the Bridge’s current status
and configuration information. These screens only display
information and cannot be used to change any settings.
System Status > System Status
This is the System Status tab’s default screen. It displays
basic status information for the Bridge.
System Status > System Status
System Up Tme
The Bridge’s live time.
Frmware Verson
The version number of the currently
installed firmware.
MAC Address
The MAC address currently assigned to the
Bridge.
LAN Settngs
The basic LAN settings.
IP Address, Subnet mask
The Bridge’s IP address and
subnet mask.
Gateway
The IP address of the Bridge’s gateway.
Click
Refresh
to display the most current information.
System Status > Wireless Status
This screen displays status information for the Bridge’s
wireless network.
System Status > Wireless Status
•
•