![background image](http://html1.mh-extra.com/html/linksys/srw224g4p/srw224g4p_user-manual_1925165013.webp)
Configuration Using the Console Interface
24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet
Chapter 4
Versions
The
Versions
screen displays the Boot Version, Software
Version, Loader Version and the Hardware Version .
Versions
Boot Verson
This file runs when the Switch is turned on .
It performs power-on diagnostics and loads the operating
system for the Switch .
Software Verson
This file contains the programming
code that runs the Switch .
Loader Verson
This file loads the software from storage
memory to main memory .
Hardware Verson
The current hardware setup of the
Switch .
General Information
The
General Information
screen displays the System
Description, System Up Time, System Mac Address, System
Contact, System Name and System Location .
General Information
Management Settings
The
Management Settings
screen displays the Serial Port
Configuration .
Management Settings
Serial Port Configuration
The
Serial Port Configuration
screen displays the current
setting for the baud rate . The baud rate can be changed by
selecting
Edt
then using the
spacebar
to toggle through
the different baud rates . Use the
Save
action to set the
new baud rate .
Serial Port Configuration
User & Password Settings
The
User & Password Settings
screen displays user account
information on the Switch . The default account is the
admn
account . To add a new user, use the
arrow keys
to
select
Edt
and then press the
Enter
key, then enter the
user name of the new account and assign a password to
the account . The password must be re-entered into the
Agan Password
column to confirm the password .
User & Password Settings