![background image](http://html1.mh-extra.com/html/linksys/srw224g4p/srw224g4p_user-manual_1925165018.webp)
Chapter
Configuring the Switch
14
24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet
Chapter :
Confgurng the Swtch
Open your web browser and enter
http://12.18.1.24
into the
address
field . Press the
Enter
key and the
Password
screen will appear .
Address Bar
NOTE:
The default IP address is
12.18.1.24
.
If the IP address has been changed using DHCP
or via the console interface, enter the assigned
IP address instead of the default .
The first time you open the web-based utility, enter
admn (
the default username) in the
username
field and
leave the password blank . Click the
OK
button . You can
set a password later from the Admin tab’s
User Accounts
screen .
Login Screen
Setup
The first screen displays the
Summary
screen on the Setup
tab . There are 10 tabs across the top of the screen:
Setup
,
Port management
,
VLAN Management
,
Statstcs
,
ACL
,
Securty
,
QoS
,
Spannng Tree
,
Multcast
, and a
More
tab . Click the
More
tab to access the
SNMP
,
Admn
and
Logout
tabs . Each tab contains screens that will help you
configure and manage the Switch .
Setup > Summary
The
Setup > Summary
screen displays a summary of
Switch information . The settings cannot be modified from
the
Setup > Summary
screen . Many of the settings can be
modified from the
Setup > Network Settings
screen .
Setup > Summary
Device Information
System Name
Displays the name for the Switch, if one
has been entered .
IP Address
The IP address assigned to the Switch is
displayed . (The default IP address is
12.18.1.24
)
Subnet Mask
The Subnet Mask assigned to the Switch is
displayed (The default is
2.2.2.0
) .
DNS Servers
The IP address of your ISP’s server, which
translates the names of websites into IP addresses .
Default Gateway
IP address of the gateway router
between this device and management stations that exist
on other network segments . (Default:
0.0.0.0
)
Address Mode
Specifies whether IP functionality is
enabled via manual configuration (Static), Dynamic Host
Configuration Protocol (DHCP), or Boot Protocol (BOOTP) .
If DHCP/BOOTP is enabled, IP will not function until a
reply has been received from the server . Requests will be
broadcast periodically by the Switch for an IP address .
(DHCP/BOOTP values can include the IP address, subnet
mask, and default gateway .)
Base MAC Address
The MAC address of the Switch is
displayed .