![background image](http://html1.mh-extra.com/html/linksys/slm224g2/slm224g2_user-manual_1925125041.webp)
Chapter
Advanced Configuration
24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs
Admin > Port Mirroring
You can mirror traffic from any source port to a target port
for real-time analysis. The Switch supports only one mirror
session.
Admin > Port Mirroring
Mode
Enables or disables Port Mirroring
Port ID
Displays the port number.
Ingress Mirror
Click on check box to select ports to which
ingress traffic will be mirrored on those selected ports.
Egress Mirror
Click on check box to select ports to which
egress traffic will be mirrored on those selected ports.
Mirror To
The target port that will mirror the ingress and
egress traffic on the selected ports.
Click
Save Settings
to save the changes.
Admin > Cable Test
Admin > Cable Test
To test the connection quality for an attached cable, select
the port from the pull-down window and click
Proceed
.
NOTE:
The cable needs to be connected at both
ends, otherwise the test will fail.
The cable test results for each port are displayed in the
table.
Admin > Save Configuration
The
Save Configuration
screen allows you to save and load
configuration information using your Web browser.
Admin > Save Configuration
Via HTTP
Upgrade
Select this option to load a previously saved
configuration file (.cfg) from a file in a specified location.
To load the file, perform the following steps:
In the
Source File
field, type in the path and name of
the file or click
Browse
to locate the file.
Click the
Proceed
button.
Click the
OK
button.
Wait until the
Continue
button becomes available and
click
Continue
to complete the process.
Backup
This option creates a configuration file (.cfg) that
contains all of the configuration settings of the Switch to a
specified location. To save the configuration file, perform
the following steps:
Click the
Proceed
button.
Click the
Save
button.
Select a location to save the file to and click
Save
.
Click the
Close
button.
Via TFTP
Upgrade
Select this option to upgrade the Switch from a
file located on a TFTP server.
TFTP Server
Enter the TFTP Server IP Address that
contains the source file to upgrade from.
Source File
Specifies the name of the upgrade file on
the TFTP Server.
1.
2.
3.
4.
1.
2.
3.
4.
•
•