![background image](http://html1.mh-extra.com/html/linksys/slm224g2/slm224g2_user-manual_1925125039.webp)
Chapter
Advanced Configuration
4
24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs
Community String
Indicates the community string of
the SNMP Trap Station.
Boot Up Trap
Enables or disables the Boot Up Trap.
Link Change Trap
Enables or disables the Link Change
Trap.
Trap Version
Indicates the trap version.
Admin
The Admin tab provides access to system administration
settings and tools. It includes the following screens:
Admin > User Authentication
The
User Authentication
screen is used to modify user
passwords.
Admin > User Authentication
Old Password
Specifies the old password. The password
is not displayed. As it entered an “˙” corresponding to each
character is displayed in the field.
New Password
Specifies the new password.
Confirm New Password
Confirms the new password.
The password entered into this field must be exactly the
same as the password entered in the Password field.
Click
Save Settings
to save the changes.
Admin > Static Address
Switches store the addresses for all known devices in a
forwarding database. This information is used to forward
traffic directly between the inbound and outbound ports.
The
Static Address
screen allows you to manually configure
static addresses that are bound to a specific port.
Admin > Static Address
Address Lookup
MAC
Physical address of a device mapped to this
interface.
VLAN ID
ID of configured VLAN (1-4094)
Specify the static MAC address, and VLAN, then click
Lookup
. The current static addresses on the Switch are all
displayed in a list. To delete a static MAC address from the
forwarding database, select the entry in the displayed list,
then click Delete.
Static Address
Item
Index of the displayed source MAC addresses.
Source MAC
Displays the static MAC address mapped to
this interface.
VLAN ID
Displays the VLAN ID associated with the static
MAC address.
Port
Displays the port associated with the static MAC
address.
Delete
Clicks on Delete to remove the static MAC
address.
Admin > Static Address > Add Static Address
Static MAC Address
Indicates the static MAC address
entry.