Linksys SLM2024 Скачать руководство пользователя страница 24

Страница: 24 / 56

Chapter 4

Configuration Using the Web-based Utility

Business Series Smart Gigabit Ethernet Switch

VLAN Management > Port to VLAN

Select VLAN

Select the ID of the VLAN whose port

membership you are configuring. For each port in the

VLAN, select the appropriate configuration option:

Tagged

The interface is a member of the VLAN. All

packets transmitted by the port will be tagged and will

carry VLAN information.

Untagged

The interface is a member of the VLAN. All

packets transmitted by the port will be untagged and

will not carry VLAN information.

Excluded

The interface is excluded from the VLAN.

This is the default option.

VLAN Management > VLAN to Port

The

VLAN to Port

screen displays each port’s VLAN

membership information. It is also used to add a port to or

delete a port from a VLAN.

VLAN Management > VLAN to Port

Port

The number of the port being configured.

Join VLAN

To configure the port’s VLAN membership,

press

Join VLAN

to bring up the

Join VLAN to Port

screen.

•

VLANs

Displays the IDs of the VLANs to which the port

belongs, prefixed by “T” if the port is tagged or “U” if the

port is untagged in that VLAN.

LAG

Displays the LAG to which the port belongs, if any.

If a port belongs to a LAG, it cannot belong to a VLAN.

However, the LAG to which the port belongs can be

configured to belong to a VLAN.

Join VLAN to Port

The

Join VLAN to Port

screen appears when you click the

Join VLAN

button for a port in the

VLAN to Port

screen. You

use this screen to configure the port’s VLAN membership.

VLAN Management > VLAN to Port > Join VLAN to Port

Select VLAN

This contains two fields. The field on the

left side of the screen lists the IDs of all available VLANs

to which the port can belong, while the field on the right

side lists the IDs of the VLANs to which the port already

belongs. Each VLAN ID is prefixed by “T” if the port is

tagged or by “U” if the port is untagged on the respective

VLAN.

Add

To add the selected port to one of the available

VLANs, select the desired VLAN from the left side of the

screen, then select the desired

Tagging

option and click

Add

. The VLAN ID will appear on the right side with the

appropriate prefix indicating a tagged or untagged port.

Remove

To remove the selected port from a VLAN,

select the VLAN from the right side of the screen and

click

Remove

. The VLAN ID appears on the left side of the

screen without the “T” or “U” prefix.

Tagging

When you are adding a port to a VLAN, select

the appropriate option to specify whether the port is

Tagged

(default) or

Untagged

Click

Save

to save your changes and leave the screen

open,

Save & Close

to save your changes and close the

screen, or click

Close

to close the screen without saving

your changes.

Содержание SLM2024

























































Результаты поиска

Содержание SLM2024

Отзывы:

Похожие инструкции для SLM2024

Бренды по названию

Популярные бренды

Linksys SLM2024, Руководство пользователя

Результаты поиска

Содержание SLM2024

Отзывы:

Похожие инструкции для SLM2024

Бренды по названию

Популярные бренды