![background image](http://html1.mh-extra.com/html/linksys/slm2024/slm2024_user-manual_1924709020.webp)
Chapter 4
Configuration Using the Web-based Utility
Business Series Smart Gigabit Ethernet Switch
Reactivate Suspended Port
If the port has been
suspended, select this checkbox to reactivate the port.
Operational Status
(Read-only) Displays whether the
port is operational or non-operational.
Admin Speed
Use this to manually set the port’s
configured transmission rate in Mbps. You can select
0M
,
00M
, or
000M
(Gigabit ports only). Before you change
this setting, make sure that
Auto Negotiation
is disabled.
Current Port Speed
(Read-only) The port’s current rate
in Mbps.
Admin Duplex
The port’s duplex mode, either
Full
or
Half
.
Current Duplex Mode
(Read-only) The port’s current
duplex mode.
Auto Negotiation
Select
Enable
(default) or
Disable
to enable or disable Auto-Negotiation on the port. Auto-
Negotiation allows a port to advertise its transmission rate,
duplex mode, and flow control settings to other ports.
Current Auto Negotiation
(Read-only) The port’s current
Auto-Negotiation status.
Admin Advertisement
Select the speed(s) and duplex
mode(s) that the port will advertise. The available speeds
are determined by the port type. The following capabilities
are supported.
Max Capability
The port advertises all speeds and
duplex mode settings.
0 Half
The port advertises 10 Mbps half-duplex
operation.
0 Full
The port advertises 10 Mbps full-duplex
operation.
00 Half
The port advertises 100 Mbps half-duplex
operation.
00 Full
The port advertises 100 Mbps full-duplex
operation.
000 Full
(Gigabit ports only) The port advertises
1000 Mbps full-duplex operation.
Current
Advertisement
(Read-only)
The
speed
and duplex mode settings that the port is currently
advertising.
Neighbor Advertisement
(Read-only) The speed and
duplex mode settings that the neighbor port (the port to
which the selected port is connected) is advertising. If the
port has no neighbor port, this field displays “Unknown.”
Back Pressure
Select
Enable
or
Disable
(default) to
enable or disable Back Pressure mode on the port.
Current Back Pressure
(Read-only) The current Back
Pressure mode on the port.
•
•
•
•
•
•
Flow Control
Select
Enable
or
Disable
to manually
enable or disable flow control, or select
Auto-Negotiation
for automatic selection of flow control on the port.
Current Flow Control
(Read-only) The current flow
control setting.
MDI/MDIX
Select the port’s MDI/MDIX type, either
MDI
,
MDIX
, or
Auto
(automatically detect type). The
MDI
setting is used if the port is connected to an end station.
The
MDIX
setting is used if the port is connected to a hub
or another switch.
Current MDI/MDIX
(Read-only) The port’s current MDI/
MDIX type.
LAG
(Read-only) The LAG to which this port belongs, if
the port is a LAG member.
Click
Save
to save the settings and leave the screen open.
Click
Save & Close
to save the settings and close the
screen. Click
Close
to close the screen without saving the
settings.
Port Management > Link Aggregation
You can create multiple links between devices that work
as one virtual, aggregate link. This is known as a Link
Aggregrated Group (LAG). LAGs offers a dramatic increase
in bandwidth for network segments where bottlenecks
exist, as well as providing a fault-tolerant link between two
devices. You can create up to eight LAGs on the Switch.
Each LAG can contain up to eight ports.
Port Management > Link Aggregation
LAG
The LAG number (1-8).
Description
The user-defined description for the LAG.
Admin Status
The administrative status of the interface.
To change it, select
Up
to enable the interface, or
Down
to disable it.
Type
Indicates if a LAG has been manually configured
(static) or dynamically set through LACP.
Link Status
Displays the status of the link.