![background image](http://html1.mh-extra.com/html/linksys/lgs308/lgs308_user-manual_1925095113.webp)
113
By selecting the forwarding mode, you can define the method used by hardware to identify
Multicast flow by one of the following options: MAC Group Address, IP Group Address, or Source
Specific IP Group Address. (S, G) is supported by IGMPv3, while IGMPv1/2 support only (*, G),
which is just the group ID. The device supports a maximum of 256 static and dynamic Multicast
group addresses. To enable Multicast filtering, and select the forwarding method:
1.
Click
Configuration > Multicast > Feature Configuration
.
2.
Bridge Multicast Filtering—Select to enable filtering of Multicast addresses.
3.
VLAN ID—Select the VLAN ID to set its forwarding method.
4.
IPv6 Multicast Forwarding—Select one of the following options:
•
By MAC Address—Select to enable the MAC address method for forwarding
Multicast packets.
•
By IPv6 Group Address—Select to enable the IPv4 group address method for
forwarding Multicast packets.
•
By Source Specific IPv6 Group Address—Select to enable the source-specific
IPv6 group address method for forwarding Multicast packets.
5.
IPv4 Multicast Forwarding—Select one of the following options:
•
By MAC Address—Select to enable the MAC address method for forwarding
Multicast packets.
•
By IPv4 Group Address—Select to enable the IPv4 group address method for
forwarding Multicast packets.
•
By Source Specific IPv4 Group Address—Select to enable the source-specific
IPv4 group address method for forwarding Multicast packets.
6.
Click
Apply
. The Running Configuration file is updated.
Содержание LGS308
Страница 1: ...1 User Guide SMART SWITCH LGS3XX...