159
When the RADIUS-Assigned VLAN feature is enabled, the host modes behave as follows:
•
Single-Host and Multi-Host Mode
Untagged traffic and tagged traffic belonging to the RADIUS-assigned VLAN are bridged
via this VLAN. All other traffic not belonging to unauthenticated VLANs is discarded.
•
Full Multi-Sessions Mode
Untagged traffic and tagged traffic not belonging to the unauthenticated VLANs arriving
from the client are assigned to the RADIUS-assigned VLAN using TCAM rules and are
bridged via the VLAN.
Workflow 1: To enable 802.1x authentication on a port
1.
Click
Configuration > Security > Network AccessControl > Feature Configuration
.
2.
Enable Port-based Authentication.
3.
Select the Authentication Method.
4.
Click
Apply
, and the Running Configuration file is updated.
5.
Click
Configuration > Security > Network Access Control > Port Authentication
.
6.
Select the required port and click
Edit
.
7.
Set the Host Authentication mode.
8.
Select a port, and click
Edit
.
9.
Set the Administrative Port Control field to Auto.
10.
Define the authentication methods.
11.
Click
Apply
, and the Running Configuration file is updated.
Workflow 2: To configure 802.1x-based authentication
1.
Click
Configuration > Security > Network Access Control > Port Authentication
.
2.
Select the required port and click
Edit
.
3.
Enter the fields required for the port. The fields in this page are described in Port
Authentication.
4.
Click
Apply
, and the Running Configuration file is updated.
Workflow 3: To configure the guest VLAN
1.
Click
Security > Network Access Control > Feature Configuration
.
2.
Select Enable in the Guest VLAN field.
3.
Select the guest VLAN in the Guest VLAN ID field.
4.
Click
Apply
, and the Running Configuration file is updated.
Содержание LGS308
Страница 1: ...1 User Guide SMART SWITCH LGS3XX...