![background image](http://html1.mh-extra.com/html/linksys/lapac1200/lapac1200_user-manual_1923787031.webp)
28
Chapter 3 Operation and Status
Linksys
LAN Status
LAN Status displays settings, and status of LAN interface
Figure 33: LAN Status Screen
Data - LAN Status
VLAN
VLAN
Enabled or disabled (default)
Untagged VLAN
Enabled (default) or disabled
When enabled, and if its VLAN ID is equal
to Untagged VLAN ID, all traffic is untagged
when sent from LAN ports Untagged traffic
can be accepted by LAN ports If disabled,
traffic is always tagged when sent from LAN
port and only tagged traffic can be accept
from LAN port
By default all traffic on the access point uses
VLAN 1, the default untagged VLAN
Untagged VLAN ID
Displays the untagged VLAN ID Traffic on
the VLAN that you specify in this field is not
be tagged with a VLAN ID when forwarded
to the network VLAN 1 is the default ID for
untagged VLAN
Management VLAN
Displays the Management VLAN ID The
VLAN associated with the IP address you
use to connect to the access point Provide
a number between 1 and 4094 for the
Management VLAN ID The default is 1
This VLAN is also the default untagged VLAN
If you already have a management VLAN
configured on your network with a different
VLAN ID, you must change the VLAN ID of the
management VLAN on the access point
IPv4/v6
IP Address
The IP address of the wireless access point
Subnet Mask
The Network Mask (Subnet Mask) for the IP
address above
Default Gateway
Enter the gateway for the LAN segment to
which the wireless access point is attached
(the same value as the PCs on that LAN
segment)
Primary DNS
The primary DNS address provided by the
DHCP server or configured manually
Secondary DNS
The secondary DNS address provided by the
DHCP server or configured manually