![background image](http://html1.mh-extra.com/html/linksys/lapac1200/lapac1200_user-manual_1923787015.webp)
CHAPTER 2 Access Point Setup
Linksys
12
Discovery Settings
Bonjour
Enable if administrator wants the access point to be
discovered by Bonjour enabled devices automatically If
VLAN is enabled, the discovery packets will be sent out via
management VLAN only The access point supports http
and https services
LLDP
Enable if administrator wants the access point to be
discovered by switch by LLDP protocol Information such as
product name, device name, firmware version, IP address,
MAC address and so on will be advertised
LLDP-MED
Enable if administrator wants the access point to be
discovered by switch by LLDP-MED protocol Information
such as product name, device name, firmware version, IP
address, MAC address and so on will be advertised
Wireless Screens
There are ten configuration screens:
•
Basic Settings
•
Security
•
Rogue AP Detection
•
Scheduler
•
Scheduler Association
•
Connection Control
•
Rate Limit
•
QoS
•
Workgroup Bridge
•
Advanced Settings
Basic Settings
Basic Settings provides the essential configuration for your wireless radio and
SSIDs You should be able to set up your wireless network with these essential
parameters configured Advanced wireless settings such as Band Steering,
Channel Bandwidth, etc , will be on Configuration
→
Wireless
→
Advanced
Settings screen
Click
Basic Settings
on the Wireless menu
Figure 16: Basic Settings Screen