CHAPTER 2 Access Point Setup
Linksys
4
Setup Wizard
The first time you connect to the wireless access point, run the
Setup Wizard
to
configure the device
1 Click the
Quick Start
link on the main menu
Figure 2: Setup Wizard
2 On the first screen, click Launch
3 Set the password on the
Device Password
screen, if desired
4 Configure the time zone, date and time for the device on
System Settings
screen
Figure 3: Setup Wizard - System Settings
5 On the
IPv4 Address
screen (Figure 4) configure the IP address of the device
then click Next If you want to configure more than 4 SSIDs, please go to
Configuration
→
Wireless
→
Basic Settings The access point supports up
to 8 SSIDs per radio
Figure 4: Setup Wizard - IPv4
6 Set the SSID information on the
Wireless Network
screen Click Next
Figure 5: Setup Wizard - Wireless Network
7 On the
Wireless Security
Screen (Figure 6) configure the wireless security
settings for the device Click Next If you are looking for security options that
are not available in the wizard, go to Configuration
→
Wireless
→
Security
page The access point supports more sophisticated security options there