15
Chapter 7: Configuring the 10/100/1000 Gigabit Network Adapter in Windows XP or 2000
Adapter Configuration
10/100/1000 Gigabit Network Adapter
Advanced
In the
Property
window, you have several properties you can configure:802.1Q/1p VLAN Tagging, Flow Control,
Jumbo Frame, Link Speed/Duplex Mode, Network Address, Offload Checksum, and Offload TCP_LargeSend.
Select the Property you want, and select Enable or Disable from the
Value
drop-down menu. When you have
finished your changes, click the
OK
button to save your changes.
Driver
On this tab, click the
Driver Details
button to view details about the driver files. Click the
Update Driver
button
to update the driver. If the Adapter fails after you upgrade its driver, click the
Roll Back Driver
button to roll back
to the previously installed driver (the Roll Back Driver feature is not available in Windows 2000). To uninstall the
driver, click the
Uninstall
button. The
Confirm Device Removal
screen will appear and ask you to confirm that you
want to uninstall the Adapter. Click the
OK
button to uninstall.
When you have finished, click the
OK
button.
Figure 7-4: Driver Tab for Windows XP
Figure 7-3: Advanced Tab for Windows XP or 2000
