![background image](http://html1.mh-extra.com/html/linksys/adsl2mue/adsl2mue_quick-installation-manual_1924386094.webp)
24
Appendix A: Troubleshooting
Frequently Asked Questions
ADSL2MUE Modem with USB and Ethernet
7. The Power LED flashes continuously.
The Power LED lights up when the device is first powered up. In the meantime, the system will boot up itself
and check for proper operation. After finishing the checking procedure, the LED remains steady to show that
the system is working fine. If the LED continues to flash after this time, the device is not working properly. Try
to flash the firmware by assigning a static IP address to the computer, and then upgrade the firmware. Try
using the following settings, IP Address: 192.168.1.50 and Subnet Mask: 255.255.255.0.
8. When I enter a URL or IP address, I get a time-out error or am prompted to retry.
•
Check if other computers work. If they do, ensure that your computer’s IP settings are correct (IP Address,
Subnet Mask, Default Gateway, and DNS). Restart the computer that is having a problem.
•
If the computers are configured correctly, but still not working, check the Modem. Ensure that it is
connected and powered on. Connect to it and check its settings. (If you cannot connect to it, check the
LAN and power connections.)
•
Manually configure the TCP/IP settings with a DNS address provided by your ISP.
•
Make sure that your browser is set to connect directly and that any dial-up is disabled. For Internet
Explorer, click
Tools
,
Internet Options
, and then the
Connection
tab. Make sure that Internet Explorer is
set to
Never dial a connection
. For Netscape Navigator, click
Edit
,
Preferences
,
Advanced
, and
Proxy
.
Make sure that Netscape Navigator is set to
Direct connection to the Internet
.
Frequently Asked Questions
What is the maximum number of IP addresses that the Modem will support?
The Modem will support up to 253 IP addresses.
Is IPSec Passthrough supported by the Modem?
Yes, it is a built-in feature that is enabed by default.
Where is the Modem installed on the network?
The Modem is installed between the ADSL wall jack and the LAN.
Does the Modem support IPX or AppleTalk?
No. TCP/IP is the only protocol standard for the Internet and has become the global standard for communications.
IPX, a NetWare communications protocol used only to route messages from one node to another, and AppleTalk, a
communications protocol used on Apple and Macintosh networks, can be used for LAN to LAN connections, but
those protocols cannot connect from the Internet to a LAN.
Does the LAN connection of the Modem support 100Mbps Ethernet?
The Modem supports 100Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Modem.