![background image](http://html1.mh-extra.com/html/linksys/adsl2mue/adsl2mue_quick-installation-manual_1924386083.webp)
13
Chapter 5: Configuring the ADSL2 Modem
Overview
ADSL2 Modem with USB and Ethernet
Chapter 5: Configuring the ADSL2 Modem
Overview
The ADSL2 Modem has been designed to be functional right out of the box, with the default settings. However, if
you'd like to change these settings, the ADSL2 Modem can be configured through your web browser with the
Web-Based Utility. This chapter explains how to configure the ADSL2 Modem in this manner.
Open your web browser and enter
192.168.1.1
. in the web browser’s Address field. (It is all right if you get an
error message at this point.) Press the
Enter
key and the following screen will appear. Enter
admin
in lowercase
letters in the User Name field, and enter
admin
in lowercase letters in the Password field (admin is the default
user name and password.) You can set a new password from the Security tab.
Setup Tab
Basic Setup
The first screen that appears displays the Setup tab. This allows you to change the ADSL2 Modem's general
settings. Change these settings as described here and click the
Save Settings
button to apply your changes or
Cancel Changes
to cancel your changes.
Internet Setup
Based on the setup instructions from your ISP, you may need to provide the following information.
Virtual Circuit ID (VPI and VCI). These fields consist of two items: VPI (Virtual Path Identifier) and VCI (Virtual
Channel Identifier). Your ISP will provide the correct settings for each field.
Multiplexing. Select
LLC
or
VC
, depending on your ISP.
Figure 5-1: Login Screen
NOTE:
Before you open your web browser, you may need to set your PC to a static IP Address. Refer
to the Troubleshooting section.
NOTE:
Contact your Internet Service Provider for
the Internet setup information.