7
9.5 Other ways of making calls
a) Calling card pager number 1.
•Press 1
•Press CALL
b) Calling card pagers from number 2 to number 4.
•Press 2
•Press _”
•Press 4
•Press CALL
c) Calling card pager(s) with letter-form messages.
•Press MSG.
•Press:
•Type in the message (i.e: PIZZA)
•Press _
”
(if less than 5 letters/numbers)
•Press the number of the target card pager(s)
•Press CALL. The pager should display the message:
PIZZA
d) Calling card pager(s) with numeric messages.
•Press MSG
•Type in the message (i.e: 23)
•Press _
”
(if less than 5 letters/numbers)
•Press the number of the target card pager(s)
•Press CALL. The pager should display the message:
23
(ex: to inform the waiter of the table number where the food
is ready to be delivered)
10. Configuring notification method for card pagers
The card pagers can notify calls through vibration and/or
music/beep.
In order to do it, connect the Home Station (recharge dock) to
the main transmitter (K1) and insert the pager(s) to configure.
10.1 Procedures to configure only with the main K1
transmitter :
•
Press FUNC.
•
Press the M button
•
Press (enter)
•
Type in the numeric “Set Code” (view following 10-2)
•
Press (enter)
10.2 Typing in the “Set Code”
The “Set Code” is composed of 4 numbers (VMNR)
V[
ibration
] :
1 (vibration ON from K1 calls)
0 (vibration OFF from K1 calls)
M[
usic
]:
1 (music ON [see TAB. A])
0 (music OFF [see TAB. A])
N[
umber
]:
from 1 to 8 (ring tone number)
R[
eminder
]:
1 (reminder ON on card pagers)
0 (reminder OFF on card pagers)
NOTE: Takes effect on card pager(s) which have been configured on the
main (K1) transmitter.
