8
10.3 Ring tone numbers (Third digit of the Set Code: _ _N_)
TAB. A
N Ring tone
1 Korean Song (Jal sara bossae)
2 La Cucaracha
3 Santa Lucia
4 beep 1 .. .. .. .. .. .. ..
5 beep 2 ..... ..... .....
6 beep 3 ._ ._ ._ ._ ._
7 vibration 1 (continuous 10 seconds)
8 vibration 2 (alternate 10 seconds)
10.4 Configuration of card pager notification method from
different transmitters.
When making a direct call in a network with more than one transmitter, each
one can be visually identified on the display of the card pagers with the code
numbers: K1, K2, …, K8 (see section 9.2), but may also be configured
different modes so that each transmitter notifies the card pagers in different
ways to allow a more rapid notification.
After having configured the main (K1) transmitter from steps on 10.1,
configure the pin code of the other transmitters to select the notification
method:
TAB. C
– Identification grid of transmitters notification methods
10.5 Different examples of "Set Code"
Ex 1)
Three transmitters of which 2 notify with music and 1
with vibration (with reminder ON):
Configure the main (K1) transmitter so that it notifies all card pagers with
the
Santa Lucia
song (follow the instructions on 10.1 with set code:
0131). From
TAB. C (above),
this would correspond to the third row of
the third column.
To configure the second transmitter so it notifies all card pagers with the
La Cucaracha
song, set the internal DS3 to K8 (see TAB. B).
To configure the third transmitter so it notifies all card pagers with
vibration type 1 (10 seconds), set the internal DS3 to K5 (see TAB. B).
Dip switch DOWN
TAB. B
- DS3 (
Dip Switch 3 inside the transmitter) : last 3 pin
