5
8. Card pager(PT-D100) usage
Left key :
•While the pager vibrates / rings, it is necessary to
press once to stop signaling. Doing so ensures the
call/message has been read, and wont be reminded
again.
•Pressing the button another time will display the
message sent from the transmitter.
•If the button isn’t pressed within 10 seconds, the pager
will stop notification and pass on to saving mode; after
one minute, the message will be reminded again (up to
a max of 4 times).
•If the call wasn’t answered, press one time to view the
missed call and one more time to confirm having read it.
IMPORTANT: IT IS POSSIBLE TO DISABLE MISSED
CALL REMINDER(see section 10.4)
Right Key :
•Needed to scroll through the calls (saves latest 8).
Message deletion:
View the message by pressing the for one second,
afterwards a symbol will appear.
Press for one second to confirm deletion.
Turning the pager on/off
1.
On/off through pager keys (PT-D100) :
To turn the pager off; press and straight afterwards
press ; keep both buttons pressed together for 5
seconds until it makes a beep sound. In order to turn
the pager back on, press for 4 seconds until it
makes a beep sound.
2.
On/off through Reset Pin
(PT-D100, PT-R100) :
Position the reset pin to the left
NOTE:
If no key is pressed within 10 seconds, the display will turn
off (saving mode). The display can be lit back up by
pressing any of the two buttons on the card pager.
Recharge time for card pager is 6 hours.
Battery life lasts around 12 hours.
It’s recommended to not charge more than 10 pagers for
each AC/DC adapter (transmitter).
*
When pager’s face is looking up
PT-D100
Reset Pin
-Right : On *
-Left : Off *
PT-R100
