13
14. Troubleshooting
PROBLEM
The pager and transmitter don’t interact with
each other.
The battery signal on the pager flashes.
The pager configuration results “FAILED”
The pager vibrates/rings shortly after a minute
from having received the message.
The transmitter doesn’t work or won’t turn on.
Red LED flashes quickly
Green LED flashes
SOLUTION
Verify that the pager is registered to the correct
ID or check if the pager is turned on.
Verify that the pager was correctly charged for
at least 6 hours.
Verify that the pager was correctly placed into
the Home Station.
Verify that the message was read and
confirmed (press once)
Verify that the transmitter is correctly connected
to the electric current or malfunctioning due to
overcharge.
Position the Reset Pin of the pager to the right.
(See section 8)
Turn the pager on through its keys
(See section 8)
MEMO
