Link4 iGrow 1800, Инструкция по установке и эксплуатации

Страница: 103 / 136

iGrow 1800 Installation Guide
Page99 Link4 (714) 524-0004
It is possible to override one, to four, of the setpoint settings by forcing the zone into one of the cooling, heating
or normal stages for a selected time period. There are
four possible stage override programs. When you go to
the stage override screen, the first highlighted segment is the Stage Override #. Use of the + or - keys selects
one of the 4 setpoints you wish to override. The next field is used to enable the override. This is done by
toggling the field from
Off to On .
Select Stage Override Number
When Stage Override 1 is highlighted press the + or – buttons to select which of the 4 Stage Overrides you
want to set.
Force to Stage ---------
With the use of the + or - , you can select the stage that you want to force the zone into.
Time Start and Stop
Enter the times of day you want the overrides condition to begin and end.
One Time Only or Daily
Choices for this field are Daily or One Time Only . If “One Time Only” is selected, once the override is
completed, it will not occur again without being reset to On. If Daily is selected, the override will occur every day
during the time window.
Equipment Overrides
System Setup
Setpoint/TimePeriod
Advanced Setpoints
Program Equipment
Dehumidify/Humidify
Stage Overrides
Equipment Overrides
Smart Cool Settings
Setpoint Alarms
Auxiliary Controls
Expansion Settings
Heat Demand
Cool Demand
01 Override Off
Vent1 Force
On
At 8:00A to 8:15A
Occurs One Time Only
This programming feature allows you to manually override your greenhouse equipment for specified periods of
time, either once or daily.
Select the Channel
Pressing the + or - to find the Channel you wish to override.