Wireless N300 Home Router
.
49
Enable UPnP:
Check/uncheck to enable/disable the UPnP feature.
OK:
Click to complete your settings.
4.5 Static Routing
When there are several routers in the network, you may want to set up
static routing. Static routing determines the path of the data in your
network. You can use this feature to allow users on different IP domains to
access the Internet via this device. It is not recommended to use this
setting unless you are familiar with static routing. In most cases, dynamic
routing is recommended, because this feature allows the router to detect
the physical changes of the network layout automatically. If you want to
use static routing, make sure the router’s DHCP function is disabled.
1. Destination Network IP Address
: Specify a single IP address, say,
172.17.0.100, or an IP net segment, .say, 192.168.88.0.
2. Subnet Mask
: Specify a Subnet Mask that corresponds to the specified
destination IP.
3. Gateway
: Specify the IP address for next hop.
4. OK:
Click to activate your settings.
