Wireless N300 Home Router
.
39
2. Configure Router 1:
1.
Go to wireless section on Router 1 and specify
WDS (
or
WDS Bridge)
as its wireless working mode.
2.
Manually enter Router 2's MAC address (Also, you can use the
Scan
option as mentioned above) and click
OK
to finish your settings.
2.4 Wireless Access Control
The Access Control feature allows you to specify a list of devices to
Permit or Forbid a connection to your wireless network via the devices’
MAC addresses. All other devices not listed as Permitted will be
Forbidden and vice versa.
1. Select the wireless network (SSID) you wish to enable Access Control
on.
