Lingenfelter NCC-001, Инструкция по установке и эксплуатации

Страница: 80 / 171

Lingenfelter NCC-001 Nitrous Control Center Installation and Operating Instructions 79
See Appendix B: Nitrous & Fuel Operation for more information.
6.8 Fuel Advance
This setting allows the fuel to start before the nitrous, therefore confirming that no nitrous flows without fuel
present. With the fuel operating at a lower pressure, this allows the proper amount of fuel to be delivered before
nitrous can flow. Some systems may not need any advance, while others may need more fuel advance than
others.
Valid Range is 0.000 to 0.250 seconds.
Access from the Controller:
From the Main screen , select the stage by pressing either the "N2O-1" button or the "N2O-2" button. Press the
“DOWN” arrow button repeatedly until the "Fuel Advance" menu selection is highlighted and then press the
“ENTER” button. Using the “LEFT” and ”RIGHT” arrow buttons adjust the setting. Press the “SAVE” button to
accept the new setting or press the “ESC” button to exit with no change.
Access from the Computer Program:
From the Status screen , select the stage by pressing either the "Nitrous1" button or the "Nitrous2" button. The
"Fuel Advance" setting is found in the "Fuel Advance Time" dialog box under the "Options" Tab. Click the "UP"
and "DOWN" arrow buttons or type in any numeric value in the valid ranges shown above.
See Appendix B: Nitrous & Fuel Operation for more information.
6.9 Nitrous Gear Position
This option allows the nitrous to be initiated by gear position. Example-if the nitrous shift count is set to 3rd gear
the nitrous would not start until the system is armed and the vehicle has reached 3rd gear. The Nitrous delay timer
will not start until the vehicle is in the selected gear position.
The valid range is integer numbers from 1 to 6.