Lingenfelter NCC-001, Инструкция по установке и эксплуатации

Страница: 137 / 171

Setup Menu 136
RPM Enable Option
Enabling the RPM Enable Option disables the data log feature of the NCC-001 until after the Arming Input is
engaged and the desired engine RPM is achieved.
Once the RPM Enable option is enabled, you will be sent back to the Data Log Menu where you can either press
the "BACK" button to exit or the "ENTER" button to adjust the RPM Enable Percent and Hysteresis Percent
settings. Refer to
Appendix D: Glossary of Terms for an explanation of how a hysteresis works.
Access from the Computer Program:
From the Status screen , press the "Data" button. The "RPM ON" settings are found in the "Data Log Enable
Parameters" dialog box under the "Options" Tab.
MPH Enable Option
Enabling the MPH Enable Option disables the log data feature of the NCC-001 until the Arming Input is engaged