Lingenfelter NCC-001, Инструкция по установке и эксплуатации

Страница: 67 / 171

Global Menu / Setup-Options 66
5.11 Update Software
Selecting this option will force the controller to enter update mode. You may exit update mode and return to
normal operation if a valid software image is present. This option is only available through the NCC-001 controller.
You MUST have a PC/laptop equipped with a USB port and the proper software installed to update the controller
software image.
Access from the Controller:
From the Main screen , press the “Global” button. Press the “DOWN” arrow button repeatedly until the "Update
Software" menu selection is highlighted and then press the “ENTER” button. Press the “YES”, “NO”, or “CANCEL”
button to change the current selection. If the “NO” or “CANCEL” button is pressed no change will be made.
5.12 Display Contrast
Use this Setting to adjust the LCD Display contrast. This setting is only available on the NCC-001 controller.
Access from the Controller:
From the Main screen , press the “GLOBAL” button. Press the “DOWN” arrow button repeatedly until the "Display
Contrast" menu selection is highlighted and then press the “ENTER” button. Using the “LEFT” and ”RIGHT” arrow
buttons adjust the setting. Press the “SAVE” button to accept the new setting or press the “ESC” button to exit
with no change.
5.13 About NCC-001
This selection displays the current firmware version and the software build date.
Access from the Controller: