D9U003VB3-0101_04
64/65
15 Disposal
15.1 Environment Protection
The company LINET® is aware of the importance of environmental protection for future generations. Within this company
the environmental management system is applied in accordance with the internationally agreed standard ISO 14001. The
compliance with this standard is annually tested by the external audit executed by an authorised company. Based on the
Directive No. 2002/96/EC (Directive
WEEE
- Waste, Electric and Electronic Equipments) the company LINET, s. r. o. is
registered in the List of Electric and Electronic Equipment Producers (
Seznam výrobců elektrozařízení
) on the Ministry
of the Environment of the Czech Republic (Ministerstvo životního prostředí).
Materials used in this product are not environmentally hazardous. LINET® products meet valid requirements of national
and European legislation in the areas of
RoHS
and
REACH
, so they do not contain any prohibited substances in excess
quantities. None of the wooden parts is made of tropical wood (such as mahogany, rosewood, ebony, teak etc.) or made
of timber from the Amazon region or from similar rainforests. Product noise (sound pressure level) meets requirements
of the regulations for the protection of public health against undesirable effects of noise and vibration in protected interior
spaces of buildings (according to standard IEC 60601-2-52). Used packaging materials are in accordance with require-
ments of the Packaging Act (
Zákon o obalech
).
For disposal of packaging materials after installation of products contact your sales representative or manufacturer´s
customer service about the possibility of a free take-back of packaging through an authorized company (more details on
www.linet.cz
).
15.2 Disposal
The main objective of the obligations arising from the European Directive No. 2012/19/EU on Waste, Electric and Electro-
nic Equipments (nationally regulated in Act No. 185/2001 Coll. as amended. On Waste and in Decree of the Ministry of
the Environment No. 352/2005 Coll. as amended), is to increase the re-use, material recovery and recovery of electric
and electronic equipment at the required level, thereby avoiding the production of waste and thereby avoiding the po-
ssible harmful effects of hazardous substances contained in electric and electronic equipment on human health and the
environment. LINET® electric and electronic equipments that have a built-in battery or accumulator are designed so that
the used batteries or accumulators can be safely removed by LINET® qualified service technicians. There is an informa
-
tion about its type on the built-in battery or accumulator.
15.2.1 Within Europe
To dispose of the electric and electronic equipment:
►
The electric and electronic equipment must not be disposed of as household waste.
►
Dispose of this equipment at designated collection points or take-back points.
To dispose of the other equipment:
►
The equipment must not be disposed of as household waste.
►
Dispose of this equipment at designated collection points or take-back points.
LINET® participates in a collective system with take-back company REMA System (see
www.remasystem.cz/sberna-
-mista/
).
By bringing electric and electronic equipment to a take-back point, you participate in recycling and you save primary raw
material resources while protecting your environment from effects of unprofessional disposal.
15.2.2 Outside Europe
►
Dispose of the product or its components in accordance with local laws and regulations!
►
Hire an approved waste disposal company for disposal!
