LINET Multicare X Скачать руководство пользователя страница 72

Страница: 72 / 169

D9U001MCX-0101_03

GO BUTTON

The button

activates the keyboard of all control elements for 3 minutes, except for Lateral Tilt Foot Control.

During this time the following is possible:

►

Adjusting individual mattress support platform elements by pressing the corresponding function buttons.

►

Disabling individual functions with the lock buttons.

Each time a function button is pressed, the keyboard will remain active for another 3 minutes.

STOP BUTTON

Pressing button

immediately stops all electronic bed movements.

FUNCTION BUTTONS

The function buttons

and

are described in chapter „13 Bed Positioning“ on the page 77.

NOTE

Pressing two function buttons at the same time will be recognized as an error by the controller. The controller will interrupt

immediately all bed movements and display shows alert.

LOCK

To lock Backrest Adjustment:

►

Press button

Corresponding LED on Attendant Control Panel is lit.

Backrest Adjustment is disabled using any Control Element.

To lock Thighrest, Calfrest and Bed Extension Adjustment:

►

Press button

Corresponding LED on Attendant Control Panel is lit.

Thighrest, Calfrest and Bed Extension Adjustment are disabled using any Control Element.

To lock Bed Height, Lateral Tilt, Trendelenburg Tilt and Antitrendelenburg Tilt Adjustment:

►

Press button

Corresponding LED on Attendant Control Panel is lit.

Bed Height, Lateral Tilt, Trendelenburg Tilt and Antitrendelenburg Tilt Adjustment are disabled using any Control Element.

UNLOCK

To unlock Backrest Adjustment:

►

Press button

Corresponding LED on Attendant Control Panel is not lit.

Backrest Adjustment is enabled again.

To unlock Thighrest, Calfrest and Bed Extension Adjustment:

►

Press button

Corresponding LED on Attendant Control Panel is not lit.

Thighrest, Calfrest and Bed Extension Adjustment are enabled again.

To unlock Bed Height, Lateral Tilt, Trendelenburg Tilt and Antitrendelenburg Tilt Adjustment:

►

Press button

Corresponding LED on Attendant Control Panel is not lit.

Bed Height, Lateral Tilt, Trendelenburg Tilt and Antitrendelenburg Tilt Adjustment are enabled again.

MAINS POWER LED

Status

Meaning

lit LED

connected to the mains

unlit LED

disconnected from the mains

flashing LED

system error

Содержание Multicare X










































































































































































Результаты поиска

Содержание Multicare X

Отзывы:

LINET Multicare X, Инструкция по использованию и техническое описание, Страница: 72 / 169

Результаты поиска

Содержание Multicare X

Отзывы: