LINET Multicare X Скачать руководство пользователя страница 126

Страница: 126 / 169

D9U001MCX-0101_03

126

17.7.8 Free Drive

The i-Drive Power motor is equipped with free drive, which is active after pressing the forwards (

) or backwards (

) buttons (until user holds the touch sensor area).

Free Drive is deactivated and the brake is activated when the direction of motion is changed. This is feature for lowering the risks

when going to a slope.

1 2 3 4

Fig.

Accumulator Charge Status

17.7.7 Braking

Press and hold the button

to brake immediately.

Press and hold the button

to brake slowly (Press the button

to brake when reversing).

Release your hand from the touch sensor area and i-Drive Power will brake automatically.

NOTE

Always brake the bed by using the castor control lever when the transport is finished or interrupted. The i-Drive Power

electromagnetic brake is not designed to permanently brake the bed.

NOTE

In a crisis situation (e.g. acceleration when driving down a steep slope) i-Drive Power dual braking prevents acceleration

and slows down bed movement. However, it is not guaranteed the bed will stop by itself without personnel support (using button

and castor control lever).

NOTE

When descending, it is possible to actively brake using the opposite direction button to slow.

NOTE

i-Drive Power is not designed for ascending or descending a slope greater than 6° or longer than 20 m. The support of

personnel is needed when ascending or descending with a full SWL.

NOTE

When i-Drive Power wheel is lowered, it is not possible to move the bed sideways. Press the button

to retract the

wheel, release the castors to the neutral position and then move the bed to any direction required.

Accumulator charge status:

While this indicator is flashing, the accumulator is critically discharged. (LED1)

50% (LED2)

75% (LED3)

100% - the accumulator is charged (LED4)

To charge the accumulator:

►

Connect the bed main cable to mains power.

►

i-Drive Power will be charged (with the accumulator discharged, the charging may take up to 9 hours).

NOTE

Accumulator charge values are just informational. Accumulator life is reduced when the accumulator is allowed to dis

charge completely.

17.7.9 Accumulator

WARNING!

It is not possible to charge the accumulator of the i-Drive Power system

when the i-Drive Power Mains Switch is in OFF position!

Содержание Multicare X










































































































































































Результаты поиска

Содержание Multicare X

Отзывы:

LINET Multicare X, Инструкция по использованию и техническое описание, Страница: 126 / 169

Результаты поиска

Содержание Multicare X

Отзывы: