Chapter 5 |
21
I/O, Clocking, and Reference
Routing a Signal to the Transcoder Input
After saving the input group, it is necessary to first set the priority of the input source by dragging the
input audio
lines
(5-4A) and then clicking when the
desired priority level
is highlighted (5-4B). The LA-5291 will look for
a signal first on the inputs connected to Priority 1. If no signal is present, it will look to subsequent priorities in
order.
Important
Priorities must be configured so that encoded sources are a higher priority than PCM (non-coded) sources.
Figure 5-4: Setting the priority.
Next, choose the input signal type for this input group (PCM, Dolby E, or Dolby ED2) from the
Type
dropdown
menu (5-5A).
Figure 5-5: Input signal type.
