Chapter 5 |
18
I/O, Clocking, and Reference
5
I/O, Clocking, and Reference
Input and Output Routing
Connect your SDI, AES-3, and/or AES67 sources to the rear panel of the LA-5291 as required for your installation.
The LA-5291 can access any of the eight audio pairs carried on its incoming HD- or SD-SDI streams. Inputs and
outputs for five stereo pairs via AES-3 are also provided.
Note:
Although the hardware is present for two independent SDI I/O paths, only the first SDI I/O is active at this
time. The second path will be enabled in a future firmware update.
Any visible and accessible AES67 networked audio source can be input into LA-5291 for decoding, transcoding,
or encoding, then returned to the network via AES67, embedded into the SDI output, and/or sent to the AES-3
output.
LA-5291 supports taking an input a signal for decoding, transcoding, or encoding from one source type and
sending the resulting audio or bitstream to another output type.
Initial I/O Setup
Log into the LA-5291 and click on the
I/O menu
(5-1A). Choose between SDI/AES-3/MADI or AES67 inputs and
outputs in the
Workflow menu
(5-1B).
Figure 5-1: I/O menu.
