ˇ
FLOW TYPE CONTACT COOLER LINDR
9
Special maintenance:
This chapter provides information for a qualified persons only.
• check the correct functioning of the circuit broker and a status of power cord
• check whether there is a noticable change in a machine operation
If you need to order replacement parts, it is always necessary to state the type and serial
number of the machine. This is written on the label.
Electrical connection:
The machine should be connected to the power supply 220-240V 50Hz, 16A fuse. Plug
circuit wiring must comply with applicable regulations of ČSN EN ISO standards. If the
power cord (cable) is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified person in order to avoid dangerous situations.
Potential areas of risk, risks which cannot be removed.
Risks related to the electricity:
Potential risks are removed thanks to the construction of the electrical system according
to CSN 331500, EN, and ISO norms.
Technical specifications:
The technical label is located on the outside front part (under the control panel) of the
machine or on the inner partition. CWP 100, CWP 100GL, CWP 200, CWP 200GL, CWP
200GL mobile, CWP 300GL a CWP 300GL mobile have a label placed on the outer casing
on the front of the machine.
Environment protection.
Waste sorting
This product must not be disposed of with any household waste. Packaging
allows the recycling and reuse of used products and packaging materials.
Reduse of recycled materials helps prevent environmental pollution and
reduces the demand for raw materials. Local regulations may provide for
separate collection of household appliances in local outlets or the point of
purchase.
