COOLING AND DISPENSING SYSTEMS
14
problem
cause
how to fix it
machine is too noisy
the machine is in contact with
some other object
move the object that touches the
machine in a way so that it´s not in
contact with a cooling machine
There is an other object in fan area remove the object from fan area
machine is not functioning
the power cord is not plugged in
plug the power cord into the
socket
not functional socket
the main switch is not on or the
thermostat is set to „0“
turn on the main switch and set
the thermostat to the desired
value
the device is turned on but does
not cool
ventilation holes are covered
release the ventilation holes
the machine has a dirty condenser
remove coarse dirt and dust by
wiping
fittings don´t seal properly
poorly inserted tube
pull out the tube, make sure there
is not a sharp edge on the tube,
possibly shorten shorten with
knife
scratches on the hose
pull out and shorten about 2 cm
If the defect still persists after the above checks recommended, please contact customer
service.
Do not forget to specify the following:
• type of fault
• product name
• product serial number (indicated on the label)
Ordering parts:
ALWAYS USE ORIGINAL COMPONENTS
For components that are not original or recommended by the manufacturer, neither the
manufacturer nor the supplier take any responsibility.
