ˇ
FLOW TYPE CONTACT COOLER LINDR
13
1.
2.
3.
Sanitizing ball
Disassembly of the compensator from the tap:
14.
Unscrew the cap nut on the dispensing tap (it will stay on the
cooler) and remove the dispense tap from the cooler)
15.
Unscrew the cap (1.) of the body of the compensator (2.)
remove the entire piece. This will release the compensator (3.)
16.
Pull out the compensator from the body of the dispensing
tap.
17.
Screw back on the whole piece (the cap nut (1.) and the body
of the compensator(2.)). Place the dispense tap in it´s original
position (on the cooler) and perform the sanitation.
18.
Sanitizing ball will stops in the body of the dispense tap.
Remove the ball !
