COOLING AND DISPENSING SYSTEMS
6
Temperature and setting:
5.
The temerature of cooled beverages is controlled by the
mechanical thermostat between 2 °C - 8 °C, which monitors
the temperature of water bath (position 1-5), ort he ice bank
creation (4-45kg depending on the type of product) (position
6-7).
0= switched off
č.1 = max. temperature
beverage 8 °C
6.
Once the following steps have been taken, you can
start up the cooling unit by connecting the power cord
and switching on the main switch.
How to work with the fittings:
č.7 = min. temperature
beverage 2 °C
7.
Push the tube into the fitting firmly (about 1.5 cm). The tube
must be cut straight to avoid any imperfect connections. If
you can´t insert the tube in, you need to moisten the end.
Disconnection:
8.
Hold the gray ring towards the body of the fitting and pull
out the tube.
CAUTION:
If you don´t hold the grey ring while pulling the
tube, the fitting will cut even more into the tube.
gray ring
THE TUBE MUST NOT BE UNDER PRESSURE WHEN DISCONNECTING !
