Linddana TP 230, Инструкция пользователя

Страница: 9 / 36

Linddana A/S . Ølholm Bygade 70 . DK-7160 Tørring . T +45 75 80 52 00 . tp@linddana.com . www.linddana.com
User instructions: TP 230 from 02.11.2015 ©Copyright 2006
9
·
During operation set the machine’s height to at least 600 mm above the ground (Figure 7).
Figure 7 Minimum height above the ground
·
During transport or when dismantled, place the PTO shaft in the machine’s shaft holder.
·
In case of transport on roads the ejector tube is turned so it is placed appropriately within
the width of the machine and then it is fixed securely.For transport on public roads, official
regulations must be obeyed.
·
The machine is equipped with a tilting funnel; this must be tipped up and secured with
split pins during transport.
·
When cleaning small chips from the base of the funnel, THE FEED ROLLERS MUST BE
STOPPED.
·
A brush or similar item must be used for cleaning. Never touch the inside of the funnel
when the machine is in operation.