Lincoln Vrtex 360 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 53

background image

vi

SAFETY

vi

VRTEX

TM

360

Recycling Welding Equipment at End of Life

Waste Electrical and Electronic Equipment (WEEE)

Recycling

Recycling and reclamation of used electrical and electronic equipment is important to many nations and localities. Lincoln
Electric provides information to assist in the recycling of welding equipment.

This parts list contains a “WEEE” column. The WEEE column describes potential recyclable materials. Materials that
require selective treatment, according to national regulations, are also identified in the WEEE column.

The following table describes substances that are potentially recyclable. Components with high substance content are
identified within the parts list. Easily identified and common components such as steel screws, steel nuts, steel washers
and copper wire are not identified on the list, but are also recyclable. Some components may contain mixed substances.

WEEE in Europe

This instruction is mandatory for equipment in Europe that displays this symbol:

Do not dispose of electrical equipment together with normal waste!

In observance of European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) and its imple-
mentation in accordance with national law, electrical equipment that has reached the end of its life must be collected sep-
arately and returned to an environmentally compatible recycling facility. As the owner of the equipment, you should get
information on approved collection systems from your local Lincoln representative. By applying this European Directive
you will protect the environment and human health!

The following components must be removed from the welding equipment and shall be selectively treated. They shall be
disposed of or recovered in compliance with Council Directive 75/442/EEC. They are identified within the parts pages:

Component

Selective Treatment

Identification

Printed circuit boards with surface greater than 10 square centimeters

ST

Liquid crystal displays with surface greater than 100 square centimeters

ST

External electric cables (not all external cables are shown on parts pages)

ST

Electrolyte capacitors with height >25 mm and diameter >25 mm or proportionately
similar in volume

ST

8/2006

Substance

Recyclable Material

Identification

Steel, Iron

Fe

Aluminum

Al

Copper

Cu

«
...
6
7
8
9
10
...
»

Содержание Vrtex 360






















































Отзывы:

Нет отзывов

Похожие инструкции для Vrtex 360

GO!control 2GIG-CNTRL2

Бренд: 2gig Technologies Страницы: 52

GO!control 2GIG-CNTRL2

Бренд: 2gig Technologies Страницы: 52

Бренд: Unisto Страницы: 2

Бренд: Wavetronix Страницы: 4

Бренд: X-10 Страницы: 32

Бренд: Jefferson Страницы: 24

Бренд: probst Страницы: 33

Бренд: CAME Страницы: 40

Бренд: Xcel-Arc Страницы: 20

ORDERCODE D3710

Бренд: DAPAudio Страницы: 13

Бренд: R. Beck Maschinenbau Страницы: 36

RIS 700HE/HW EKO 3.0

Бренд: Salda Страницы: 40

Бренд: Onkyo Страницы: 8

Бренд: Tractel Страницы: 162

Hy-Brid 3 Series

Бренд: Custom Equipment Страницы: 23

Бренд: aqprox! Страницы: 22

Бренд: Mithraeum Страницы: 33

Laron BL digital

Бренд: BAK Thermoplastic Welding Technology Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды