Lincoln SKF TLGB 20, Руководство пользователя

Страница: 32 / 80

5
4
Operation
Display and light
To turn display ( 5 ) “on”, either:
• Push button “1” ( 4 ) ( † fig. 3 )
• Squeeze the trigger/switch.
To turn light “on/off”:
• Push button “1” (
4 ).
Display and light shut off automatically after
30 seconds if gun is not operating.
Speed selection
Pressing button “2” ( 4 ) switches the tool
between high and low pump speed.
The letter “L” or “h” will be displayed on
the screen.
High delivers 160 ml/min. (5.5 oz/min.) at
69 bar (1 000 psi) back pressure.
Low delivers 100 ml/min. (3.5 oz/min.) at
69 bar (1 000 psi) back pressure.
Motor speed increases automatically from
“L” to “H” if back pressure exceeds
2 500 psi
(172 bar)
.
Switch units
Switch units of measure between ounces
or grams by holding button “1” (
4 ) for
15 seconds ( † fig. 3 ).
5
4
g
Control/monitor grease
application
Refer to the display representations in fig. 4 .
1 To set display reading to zero, press set but-
ton “1” (
4 ) for 3 seconds ( † fig. 4A ).
2 Squeeze trigger to run and stop the gun at
desired output. (0.6 oz. Is shown in
fig. 4B ).
3 Press button “2” ( 4 ) to switch between low
and high. ( † fig. 4C )
4A 4B
4C
Fig. 3
NOTE
Grease meter displays output only if grease
gun is adequately primed.
4 Press button “1” ( 4 ) for 15 seconds to switch
between ounces and grams ( † fig. 4C ).
Fig. 4
12