Lincoln SKF TLGB 20, Руководство пользователя

Страница: 26 / 80


WARNING
Do not use any hose not approved by
SKF. Extreme pressure may cause noz-
zle extension or whip hose to burst.
Replace hose at first sign of wear,
kinks, or damage to outside jacket.
Follow whip hose instructions
and warnings.
Failure to comply may result in death
or serious injury.

WARNING
Do not perform maintenance on tool
with battery installed. Do not clean
charger with battery
plugged in.
Failure to comply may result in death
or serious injury.

WARNING
Grease gun can develop high pressure
up to 10 000 psi
(689 bar) .
Use safety glasses and gloves for pro-
tection during operation. Keep hands
clear of exposed rubber portion of hose.
Failure to comply may result in death
or serious injury.
Time-lag miniature
fuze link, 15A
IEC
IEEE/ANSI
IEEE/ANSI
Vibration
Declared vibration emission values stated in
technical data and declaration of conformity.
have been measured in accordance with a
standard test method provided by EN 62841
and may be used for comparing one tool
with another.
Declared vibration emission value may
also be used in a preliminary assessment
of exposure.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly
using power tools in employment, estima-
tion of vibration exposure should consider
actual conditions of use and the way the tool
is used, including taking account of all parts
of operating cycle such as times when tool is
switched off and when it is running idle in
addition to trigger time.
Maintenance
TLGB 20 is designed to operate over long
period of time with minimum maintenance.
Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
Charger does not require any mainte-
nance apart from regular cleaning.
NOTE
Vibration emission value during actual
use of power tool can differ from
declared value depending on how tool is
used.
Vibration level may increase above
level stated.
NOTE
Clean ventilation slots in tool and
charger using soft brush or
dry cloth.
Regularly clean motor housing using
damp cloth. Do not use any abrasive or
solvent-based cleaner.
Residual risks
Additional residual risks may arise when
using tool that may not be included in
enclosed safety warnings. These risks can
arise from misuse, prolonged use, etc.
Even with application of relevant safety
regulations and implementation of safety
devices, certain residual risks cannot be
avoided. These include:
• Injuries caused by touching any rotat-
ing/ moving parts.
• Injuries caused when changing any
parts, blades or accessories.
• Injuries caused by prolonged use of tool.
When using any tool for prolonged peri-
ods ensure regular breaks are taken.
• Impairment of hearing.
• Health hazards caused by breathing
dust developed when using your tool
(example: working with wood, especially
oak, beech and MDF).
Labels on
battery charger*
The following symbols are shown on tool:
 WARNING
Do not use tool before reading manual
to reduce risk of injury.
Failure to comply may result in death
or serious injury.
* Indicates change.
6