INTKEY COULD NOT PROGRAM
— Displayed when an attempt is
made to program a fifth integrated key to the Remote keyless entry
system. For more information on integrated key, refer to the
Locks and
Security
chapter.
CRUISE ON RADAR READY (if equipped)
— Displayed when the
driver pressed the cruise On/Off control and ACC was off.
CRUISE OFF (if equipped)
— Displayed when the driver pressed the
Cruise On/Off control and ACC was on.
SET XXX MPH GAP ACC GAP (if equipped)
— Displayed when
ACC is active and driver has selected a GAP setting using the steering
wheel control <---> button.
CRUISE OVERRIDE (if equipped)
— Displayed when the accelerator
pedal is being pressed while ACC is active.
DRIVER INTERVENE (if equipped)
— Refer to
Adaptive Cruise
Control
in this chapter.
CRUISE NOT AVAILABLE (if equipped)
— Displayed when a system
malfunction is preventing ACC from engaging.
CRUISE MALFUNCTION (if equipped)
— Displayed when a radar
malfunction is preventing the ACC from engaging.
CRUISE RADAR BLOCKED (if equipped)
— Displayed when the
radar is blocked because of poor radar visibility due to bad weather or
ice/mud/water in front of radar. Driver can typically clean the sensor to
resolve.
PRESS BRAKE TO START (if equipped)
— Displayed when the
start/stop button is pressed without the brake pedal being applied. This
is a reminder that the brake pedal must be applied when the start/stop
button is pressed in order to start the engine.
NO FOB DETECTED (if equipped)
— Displayed if the Intelligent
Access Key is not detected by the system in the following three
scenarios:
•
When the start/stop button is pressed in an attempt to either start the
engine or cycle through the ignition states.
•
When the engine is running and a door is opened then closed.
•
When the vehicle’s speed exceeds 10 mph (16 km/h) for the first time
after starting. Refer to
Push button start system
in the
Driving
chapter
for more information.
Driver Controls
94
2009 MKS
(mks)
Owners Guide
(own2002)
, 3rd Printing
USA
(fus)
